Product Details
Owners of the 2009 Subaru Legacy 3.0 R Limited (BM/BR) can fit the Whiteline Rear Upper Inner Control Arm Bushing Kit (Standard Repl.). Included: 8 bushings and 4 tubes. The listing names the 3.0 R Limited trim. This part is for the rear of the vehicle. The part number is W63225.
When a control arm bushing fails, the wheel is no longer held where it should be under braking and over bumps. This is a like-for-like replacement: it restores the original pivot behavior and ride comfort rather than changing them.
Expect a moderate job of about 3 hours. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts for the Legacy.
Features
- Material: Built from polyurethane.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Step-by-step installation instructions come with it.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W63225 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009 Subaru Legacy 3.0 R Limited |
| Chassis Code | BM/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12.3 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |