Product Details
This Whiteline Rear Upper Inner Control Arm Bushing Kit (Standard Repl.) fits the 2009-2011 Subaru Forester (SH). The part number is W63225. It goes on the rear of the vehicle. Included: 8 bushings and 4 tubes.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Forester: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Step-by-step installation instructions come with it.
- Material: Built from polyurethane.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | W63225 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2011 Subaru Forester |
| Chassis Code | SH |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12.3 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



