Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (Standard Repl.) fits the 2007-2012 Mazda CX-7 Grand Touring, Sport, Touring (ER). Included: 2 shell bushings and 2 tubes. Whiteline part number: W63322. Position: rear. Application note: Standard Replacement: suits cast arms.
Control arm bushings wear out quietly. Over time the rubber hardens, cracks, or tears, and the arm starts to move in ways its designers did not intend, which shows up as clunks, vague steering, or uneven tire wear. A standard replacement bushing puts the pivot back to the way the car was built.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. We also list 14mm Adjustable Front Camber Bolts for the CX-7.
Features
- Bonded design: Bonding adds durability in high-load use.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Made from polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W63322 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2012 Mazda CX-7 Grand Touring, Sport, Touring |
| Drivetrain | FWD/AWD |
| Chassis Code | ER |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 38 mm |
| Bushing 2 Outer Diameter | 36 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement - suits cast arms |



