Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (42mm OD) fits the 2008-2009 Honda S2000 CR (AP2). It goes on the rear of the vehicle. Part number W63444. The kit contains 8 bushings and 4 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit for the S2000.
Features
- Material: Made from polyurethane.
- Install guide: Whiteline packs an install guide with it.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W63444 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Honda S2000 CR (AP2) |
| Chassis Code | AP2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42.1 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



