Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (42mm OD) fits the 2000-2009 Honda S2000 (AP1/AP2). The kit contains 8 bushings and 4 tubes. This part is for the rear of the vehicle. Part number W63444.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the S2000: Adjustable Rear Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Built from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W63444 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2009 Honda S2000 (AP1/AP2) |
| Chassis Code | AP1/AP2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 42.1 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



