Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (35mm OD) fits the 2008-2009 Honda S2000 CR (AP2). The kit contains 8 bushings and 4 tubes. Position: rear. Part number W63443.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. Other Whiteline parts we list for the S2000: Adjustable Rear Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Material: Built from polyurethane.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Install guide: An install guide comes in the box.
Specifications
| Part Number | W63443 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Honda S2000 CR (AP2) |
| Chassis Code | AP2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




