Product Details
This Whiteline Rear Upper Inner Control Arm Bushing (35mm OD) fits the 2000-2009 Honda S2000 (AP1/AP2). Position: rear. Chassis code: AP1/AP2. In the box: 8 bushings and 4 tubes. Part number W63443.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the S2000: Adjustable Rear Sway Bar Link, Front Upper Control Arm Bushing Kit, and Tie Rod Boot Kit.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: The part is made of polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W63443 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2009 Honda S2000 (AP1/AP2) |
| Chassis Code | AP1/AP2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




