Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2010-2011 Subaru Impreza WRX 2.5i Premium (GE/GH/GR/GV). It goes on the rear of the vehicle. Whiteline's note for this fit: On-car adjustable allows +/-0.75 degrees. Whiteline part number: KCA326. Included: 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Impreza WRX 2.5i Premium, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2010-2011 Subaru Impreza WRX 2.5i Premium |
| Drivetrain | AWD |
| Chassis Code | GE/GH/GR/GV |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |




