Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2009 Subaru Forester XT (SH). Whiteline's note for this fit: On-car adjustable allows +/-0.75 degrees. The kit contains 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts. Part number KCA326. It goes on the rear of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Forester, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Install guide: Written install instructions are included with the part.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Hardware: Hardware supplied: mounting hardware.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2009 Subaru Forester XT |
| Chassis Code | SH |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |




