Product Details
This Whiteline Rear Upper Inner Control Arm Bushing fits the 2009-2014 Audi TT Quattro S (8J). Chassis code: 8J. Order it as part number W63549. The kit contains 2 bushings and 2 tubes. It goes on the rear of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Adjustable Front Sway Bar Link for the Audi TT.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Finish: A powder coated finish resists corrosion and wear.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Material: Polyurethane construction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63549 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2014 Audi TT Quattro S |
| Chassis Code | 8J |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40.3 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |




