Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2009-2011 Subaru Impreza WRX Premium (GE/GH/GR/GV). Position: rear. The kit contains 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts. Order it as part number KCA326. Application note: On-car adjustable allows +/-0.75 degrees.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Impreza WRX Premium, see Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
- Install guide: An install guide comes in the box.
- Hardware: Supplied with mounting hardware.
- Anodized alloy: The alloy carries an anodized finish for durability.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2009-2011 Subaru Impreza WRX Premium |
| Drivetrain | AWD |
| Chassis Code | GE/GH/GR/GV |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |




