Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2009-2010 Subaru Impreza WRX 2.5 GT (GE/GH/GR/GV). Position: rear. Whiteline part number: KCA326. Whiteline's note for this fit: On-car adjustable allows +/-0.75 degrees. In the box: 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 3 hours. An alignment is required after installation. Other Whiteline parts we list for the Impreza WRX 2.5 GT: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Hardware: Hardware supplied: mounting hardware.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2009-2010 Subaru Impreza WRX 2.5 GT |
| Drivetrain | AWD |
| Chassis Code | GE/GH/GR/GV |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |



