Product Details

This Whiteline Rear Upper Inner Bushing Offset Camber Kit fits the 2008-2011 Mitsubishi Lancer GTS (CY). You receive 2 shell bushings and 2 tubes. Application note: Adds +/- 0.5 degrees Camber. Part number KCA329. It goes on the rear of the vehicle.

Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.

Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Lancer: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.

Features

  • Material: The part is made of polyurethane.
  • Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
  • Corrosion protection: Metal parts are plated to resist rust over the long term.
  • Bonded design: The bushing is bonded for extra strength under heavy loads.
  • Install guide: An install guide comes in the box.
  • Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
Part Number KCA329
Part Name Bushing Camber Kit
Vehicle 2008-2011 Mitsubishi Lancer GTS
Chassis Code CY
Drivetrain AWD/FWD
Bushing 1 Inner Diameter 12 mm
Bushing 1 Outer Diameter 36.5 mm
Bushing 2 Outer Diameter 36 mm
Bushing Quantity 2 Shell Bushings
Grade Type Performance
Inside Diameter 12 mm
Installation Difficulty Moderate
Installation Time (hrs) 3
Kit Contents 2 Shell Bushings, 2 Tubes
Material Polyurethane
Mounting Hardware Included No
Outside Diameter 36.5 mm
Vehicle Placement Rear
Wheel Alignment Required Yes
Notes Adds +/- 0.5Degree Camber

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
2008MitsubishiLancerAWDAdds +/- 0.5Degree Camber
2008MitsubishiLancerFWDAdds +/- 0.5Degree Camber
2009MitsubishiLancerAWDAdds +/- 0.5Degree Camber
2009MitsubishiLancerFWDAdds +/- 0.5Degree Camber
2010MitsubishiLancerAWDAdds +/- 0.5Degree Camber
2010MitsubishiLancerFWDAdds +/- 0.5Degree Camber
2011MitsubishiLancerAWDAdds +/- 0.5Degree Camber
2011MitsubishiLancerFWDAdds +/- 0.5Degree Camber

Customer Reviews

Questions & Answers