Product Details
This Whiteline Rear Control Arm Bushing Upper - Inner Double Offset Camber Kit fits the 2008-2010 Subaru Forester XT Limited (SH). In the box: 8 bushings, 4 tubes, 8 bolts, 8 washers, and 4 nuts. Whiteline part number: KCA326. Position: rear. Application note: On-car adjustable allows +/-0.75 degrees.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Forester: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Front Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Finish: The metal parts are powder coated for durability.
- Hardware: Supplied with mounting hardware.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | KCA326 |
| Part Name | Control Arm Camber Correction Kit |
| Vehicle | 2008-2010 Subaru Forester XT Limited |
| Chassis Code | SH |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 34 mm |
| Bushing 2 Inner Diameter | 12 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 8 Bushings |
| Bushings Included | Yes |
| Grade Type | Performance |
| Inside Diameter | 15.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes, 8 Bolts, 8 Washers, 4 Nuts |
| Mounting Hardware Included | Yes |
| Outside Diameter | 34 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | On-car adjustable allows +/-0.75 Degrees; |




