Product Details
This Whiteline Rear Upper Inner Control Arm Bushing fits the 2007 Subaru Outback 2.5i Basic (BR). This part is for the rear of the vehicle. Order it as part number W63396. The kit contains 4 bushings and 2 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 1 hour. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Outback.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Made from polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Corrosion protection: The hardware is plated to stand up to road conditions.
Specifications
| Part Number | W63396 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007 Subaru Outback 2.5i Basic |
| Chassis Code | BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 33.6 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |


