Product Details

This Whiteline Rear Upper Inner Control Arm Bushing fits the 1999-2000 Subaru Legacy Brighton (BE/BH). The part number is W63396. Position: rear. Included: 4 bushings and 2 tubes.

Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.

Installation is rated moderate, with about 1 hour of work listed. An alignment is required after installation. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.

Features

  • Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
  • Material: Built from polyurethane.
  • Grease: Moly grease is supplied to prolong the life of the parts.
  • Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
  • Corrosion protection: Plated finish keeps rust off the hardware.
  • Finish: Powder coat finish guards the metal against chips and corrosion.
Specifications
Part Number W63396
Part Name Control Arm Bushing
Vehicle 1999-2000 Subaru Legacy Brighton
Chassis Code BE/BH
Bushing 1 Inner Diameter 12.2 mm
Bushing 1 Outer Diameter 33.6 mm
Bushing Quantity 4 Bushings
Grade Type Regular
Installation Difficulty Moderate
Installation Time (hrs) 1
Kit Contents 4 Bushings, 2 Tubes
Material Polyurethane
Mounting Hardware Included No
Vehicle Placement Rear
Wheel Alignment Required Yes
Notes -

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1999SubaruLegacyAWD
2000SubaruLegacyAWD

Customer Reviews

Questions & Answers