Product Details
This Whiteline Rear Control Arm Upper Front Bushing (Standard Repl.) fits the 2006-2010 Dodge Charger SRT8 (LX). Whiteline part number: W63340. It goes on the rear of the vehicle. Whiteline's note for this fit: Standard Replacements. Qty 2 needed per vehicle. Included: 4 shell bushings, 4 tubes, and 2 washers.
When a control arm bushing fails, the wheel is no longer held where it should be under braking and over bumps. This is a like-for-like replacement: it restores the original pivot behavior and ride comfort rather than changing them.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. Other Whiteline parts we list for the Charger SRT8: Front and Rear Sway Bar Kit, Rear Subframe Mount Bushing, and Front Lower Radius Arm Bushing.
Features
- Material: Made from polyurethane.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W63340 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2010 Dodge Charger SRT8 |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 2 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacements. Qty 2 needed per vehicle. |



