Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2008-2013 BMW 135i 1 Series (E82/E88). Position: rear. Whiteline's note for this fit: Fits OEM Arm 33-32-2-406-289. You receive 4 shell bushings and 4 tubes. The part number is W63403.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. Plan on a wheel alignment afterward. We also list Adjustable Front Sway Bar Link, Rear Subframe Mount Bushing, and Heavy Duty 20mm Rear Sway Bar for the 135i 1 Series.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Install guide: Step-by-step installation instructions come with it.
- Material: The part is made of polyurethane.
Specifications
| Part Number | W63403 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2013 BMW 135i 1 Series |
| Chassis Code | E82/E88 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 45.4 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Fits OEM Arm 33-32-2-406-289 |


