Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2015 Dodge Challenger Scat Pack (LA). Position: rear. In the box: 4 shell bushings and 4 tubes. The part number is W63342. Whiteline's note for this fit: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Plan on a wheel alignment afterward. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Challenger.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Built from polyurethane.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2015 Dodge Challenger Scat Pack |
| Drivetrain | RWD |
| Chassis Code | LA |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |




