Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2014 Dodge Challenger Rallye Redline (LC). The part number is W63342. This part is for the rear of the vehicle. The kit contains 4 shell bushings and 4 tubes. Application note: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Challenger, see Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2014 Dodge Challenger Rallye Redline |
| Chassis Code | LC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |



