Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2012 Dodge Charger SXT Plus (LD). Part number W63342. This part is for the rear of the vehicle. Whiteline's note for this fit: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. In the box: 4 shell bushings and 4 tubes.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Charger.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Written install instructions are included with the part.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012 Dodge Charger SXT Plus |
| Drivetrain | RWD/AWD |
| Chassis Code | LD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |




