Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2012-2016 Dodge Challenger SXT, SXT Plus (LC/LA). Application note: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. You receive 4 shell bushings and 4 tubes. Order it as part number W63342. Placement: rear.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. To go with it on the Challenger, see Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Built from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2012-2016 Dodge Challenger SXT, SXT Plus |
| Drivetrain | RWD |
| Chassis Code | LC/LA |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |




