Product Details
This Whiteline Rear Control Arm Upper Front Bushing fits the 2006 Dodge Charger Daytona R/T (LX). Application note: Adds +/- 0.5 degrees Camber. Qty 2 needed per vehicle. Whiteline part number: W63342. You receive 4 shell bushings and 4 tubes. Position: rear.
Most factory control arm bushings are centered and fixed. An offset one is built so the arm sits at a slightly different angle, which changes camber, and the firmer material stops that setting drifting under load.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Charger.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W63342 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006 Dodge Charger Daytona R/T |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 39.5 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5Degree Camber. Qty 2 needed per vehicle. |



