Product Details
Owners of the 2000 Subaru Legacy Brighton (BE/BH) can fit the Whiteline Rear Control Arm Service Kit. Whiteline's note for this fit: Service kit to suit Whiteline control arms KTA124. The part number is KSK124. Position: rear. Included: 12 bushings, 6 tubes, and 8 washers. Trim named on the listing: Brighton.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 2 hours. An alignment is required after installation. Other Whiteline parts we list for the Legacy: Adjustable Rear Sway Bar Link, Front Control Arm Lower Inner Rear Bushing, and 14mm Adjustable Front Camber Bolts.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Material: Built from polyurethane.
Specifications
| Part Number | KSK124 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000 Subaru Legacy Brighton |
| Chassis Code | BE/BH |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing Quantity | 12 Bushing |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 12 Bushings, 6 tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Service kit to suit Whiteline control arms KTA124 |