Product Details
This Whiteline Rear Control Arm Lower Rear Outer Bushing fits the 2005-2009 Subaru Outback XT Limited (BP/BR). Placement: rear. Whiteline part number: W63394. You receive 4 bushings and 2 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Step-by-step installation instructions come with it.
- Finish: A powder coated finish resists corrosion and wear.
- Material: Built from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
Specifications
| Part Number | W63394 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2009 Subaru Outback XT Limited |
| Chassis Code | BP/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 33.8 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

