Product Details
This Whiteline Rear Control Arm Lower Rear Outer Bushing fits the 2005-2009 Nissan 350Z Grand Touring (Z33). Part number W62535. This part is for the rear of the vehicle. Application note: Locates in hub. Excluding models with Rear Active Steering. In the box: 2 shell bushings and 2 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 2 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, Adjustable Sway Bar Vehicle Link Kit, and Front and Rear Sway Bar Kit for the 350Z.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Made from polyurethane.
- Finish: A powder coated finish resists corrosion and wear.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W62535 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2009 Nissan 350Z Grand Touring |
| Chassis Code | Z33 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 36.5 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Locates in hub. Excluding models with Rear Active Steering |



