Product Details
This Whiteline Rear Control Arm Lower Rear Inner Bushing fits the 2006 Subaru Outback R VDC Limited (BP/BR). Part number W63395. It goes on the rear of the vehicle. You receive 2 shell bushings and 2 tubes.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bonded design: A bonded design adds strength for high load applications.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: Polyurethane construction.
- Finish: The metal parts are powder coated for durability.
Specifications
| Part Number | W63395 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006 Subaru Outback R VDC Limited |
| Chassis Code | BP/BR |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 38.1 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

