Product Details
This Whiteline Rear Control Arm Lower Rear Inner Bushing fits the 2005 Subaru Outback i, VDC Limited (BP). Included: 2 shell bushings and 2 tubes. Placement: rear. Order it as part number W63395.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Outback.
Features
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bonded design: Bonding adds durability in high-load use.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Material: The part is made of polyurethane.
Specifications
| Part Number | W63395 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005 Subaru Outback i, VDC Limited |
| Chassis Code | BP |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 38.1 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

