Product Details
This Whiteline Rear Control Arm Lower Rear Inner Bushing fits the 2002-2004 Subaru Outback H6 (BE/BH/BP). Part number W63395. Position: rear. You receive 2 shell bushings and 2 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. An alignment is required after installation. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Made from polyurethane.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | W63395 |
| Part Name | Control Arm Bushing |
| Vehicle | 2002-2004 Subaru Outback H6 |
| Chassis Code | BE/BH/BP |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 38.1 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

