Product Details
This Whiteline Rear Control Arm Lower Rear Inner Bushing fits the 2000-2008 Subaru Outback Base (BE/BH/BP/BR). Position: rear. In the box: 2 shell bushings and 2 tubes. Whiteline part number: W63395.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Outback.
Features
- Grease: Moly grease is supplied to prolong the life of the parts.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Bonded design: Bonding adds durability in high-load use.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Material: The part is made of polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W63395 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2008 Subaru Outback Base |
| Drivetrain | AWD |
| Chassis Code | BE/BH/BP/BR |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 38.1 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |


