Product Details
This Whiteline Rear Lower Toe Control Arm Bushing Kit fits the 1991-1998 Nissan 240SX Base, LE (S13/S14). Whiteline part number: KCA347. Position: rear. You receive 8 bushings and 4 tubes. Application note: Adds +/- 0.75 degrees Camber.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. Other Whiteline parts we list for the 240SX: 12mm Adjustable Front Camber Bolts, Rear Sway Bar Link, and Front Sway Bar Washer Kit.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: An install guide comes in the box.
- Material: The part is made of polyurethane.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | KCA347 |
| Part Name | Control Arm Bushing |
| Vehicle | 1991-1998 Nissan 240SX Base, LE |
| Chassis Code | S13/S14 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 29.5 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.6 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 29.5 mm |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.75 Degrees Camber |




