Product Details
This Whiteline Rear Control Arm Lower Outer Bushing fits the 1997-2001 BMW 323i 3 Series. In the box: 2 shell bushings, 2 tubes, 2 bolts, and 4 nuts. It goes on the rear of the vehicle. Order it as part number W62384. Chassis code: E36/E46.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. An alignment is required after installation. Working on the same car? We also list Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and Adjustable Front Sway Bar Link for the 323i 3 Series.
Features
- Material: Built from polyurethane.
- Hardware: Also in the box: mounting hardware.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Bonded design: Bonding adds durability in high-load use.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
| Part Number | W62384 |
| Part Name | Control Arm Bushing |
| Vehicle | 1997-2001 BMW 323i 3 Series |
| Drivetrain | RWD |
| Chassis Code | E36/E46 |
| Bushing 1 Inner Diameter | 11.9 mm |
| Bushing 1 Outer Diameter | 45.5 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 2 Bolts, 4 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |