Product Details
This Whiteline Rear Control Arm Lower Inner Bushing fits the 2009-2010 Dodge Challenger R/T, SE (LC). It goes on the rear of the vehicle. In the box: 4 bushings and 2 tubes. Part number W63339. Application note: Suits inner mounting point only as outer is a spherical/rose joint.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Challenger.
Features
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: Made from polyurethane.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W63339 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2010 Dodge Challenger R/T, SE |
| Chassis Code | LC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 51.5 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits inner mounting point only as outer is a spherical/rose joint |



