Product Details
This Whiteline Rear Control Arm Lower Inner Bushing fits the 2008-2010 Dodge Challenger SRT8 Base (LC). The part number is W63339. Position: rear. Application note: Suits inner mounting point only as outer is a spherical/rose joint. The kit contains 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Challenger SRT8: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Front Lower Radius Arm Bushing.
Features
- Material: Polyurethane construction.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
Specifications
| Part Number | W63339 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2010 Dodge Challenger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 51.5 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits inner mounting point only as outer is a spherical/rose joint |



