Product Details
This Whiteline Rear Control Arm Lower Inner Bushing fits the 2006-2010 Dodge Charger SRT8 Base (LX). Position: rear. Application note: Suits inner mounting point only as outer is a spherical/rose joint. Whiteline part number: W63339. The kit contains 4 bushings and 2 tubes.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. Other Whiteline parts we list for the Charger SRT8: Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Front Lower Radius Arm Bushing.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Material: Polyurethane construction.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Finish: The metal is powder coated, which resists corrosion and wear.
Specifications
| Part Number | W63339 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2010 Dodge Charger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 51.5 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Suits inner mounting point only as outer is a spherical/rose joint |



