Product Details
This Whiteline Rear Control Arm Lower Inner and Outer Bushing fits the 2017-2020 BMW 440i 4 Series (F32/F33). Included: 4 shell bushings and 4 tubes. Whiteline's note for this fit: Fits OEM Arm 33-32-6-792-533. Part number W63594. This part is for the rear of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, Rear Subframe Mount Bushing, and Front Sway Bar Link Assembly for the 440i 4 Series.
Features
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | W63594 |
| Part Name | Control Arm Bushing |
| Vehicle | 2017-2020 BMW 440i 4 Series |
| Chassis Code | F32/F33 |
| Drivetrain | RWD |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 37 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Fits OEM Arm 33-32-6-792-533 |

