Product Details
This Whiteline Rear Control Arm Lower Inner and Outer Bushing fits the 1995 Subaru Legacy Base (BD/BG). Included: 16 bushings and 8 tubes. The part number is W61382A. It goes on the rear of the vehicle.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. We also list 14mm Adjustable Front Camber Bolts, Front Steering Rack And Pinion Mount Bushing, and Front Strut Tower Brace for the Legacy.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Material: Built from polyurethane.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W61382A |
| Part Name | Control Arm Bushing |
| Vehicle | 1995 Subaru Legacy Base |
| Drivetrain | FWD/AWD |
| Chassis Code | BD/BG |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 34.2 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing Quantity | 16 Bushing |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 16 Bushings, 8 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |



