Product Details
This Whiteline Rear Control Arm Lower Front Inner and Outer Bushing fits the 2007-2009 Subaru Legacy (BM/BR). The kit contains 4 shell bushings and 4 tubes. It goes on the rear of the vehicle. Order it as part number W63393.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Finish: Powder coating covers the metal for protection against chips and rust.
- Material: Built from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Bonded design: A bonded design adds strength for high load applications.
Specifications
| Part Number | W63393 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2009 Subaru Legacy |
| Chassis Code | BM/BR |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

