Product Details
This Whiteline Rear Control Arm Lower Front Inner and Outer Bushing fits the 2003 Subaru Legacy L SE (BE/BH/BL/BP). You receive 4 shell bushings and 4 tubes. Whiteline part number: W63393. This part is for the rear of the vehicle.
Every time the wheel moves, the control arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Plan on a wheel alignment afterward. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Finish: The metal is powder coated, which resists corrosion and wear.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Material: The part is made of polyurethane.
- Bonded design: Bonding adds durability in high-load use.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | W63393 |
| Part Name | Control Arm Bushing |
| Vehicle | 2003 Subaru Legacy L SE |
| Chassis Code | BE/BH/BL/BP |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 40 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | - |

