Product Details
This Whiteline Rear Control Arm Front Lower Bushing fits the 1986-1991 Mazda RX-7 Base, Turbo (FC). Position: rear. Part number W61965. The kit contains 2 bushings and 1 tube. Application note: Control arm inner to chassis link.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the RX-7: 12mm Adjustable Front Camber Bolts, Front Control Arm Lower Inner Front Bushing, and Tie Rod Boot Kit.
Features
- Material: The part is made of polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W61965 |
| Part Name | Control Arm Bushing |
| Vehicle | 1986-1991 Mazda RX-7 Base, Turbo |
| Chassis Code | FC |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 25.3 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Bushings, 1 Tube |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Rear |
| Wheel Alignment Required | Yes |
| Notes | Control arm inner to chassis link |

