Whiteline Motor Mount Bushing for 1987-1988 Chevrolet R20 Suburban (C/K) W93464

Whiteline

|

SKU: W93464

Whiteline Motor Mount Bushing for 1987-1988 Chevrolet R20 Suburban (C/K)

$34.99

MSRP $38.88 You save $3.89

Ask a question
In stock, ready to ship

Authorized DealerGenuine parts & warranty
20+ Years in BusinessTrusted since 2005
Free USA ShippingOn orders $250+
Best Price GuaranteeWe’ll match or beat it
Fitment Notes

All fitment information on our website is provided by the manufacturer. It is the customer's responsibility to thoroughly read the product description and confirm fitment before placing an order and proceeding with installation.

Unless specified otherwise, all suspension products are designed for 2WD vehicles only. Any notes or descriptions related to electronic damping systems (EDC, DDS, etc.) apply strictly to vehicle fitment. Aftermarket coilovers are not compatible with OEM electronic damping control systems unless explicitly stated.

*Product images may not represent the actual SKU.

Handling Time

All handling times are estimates and may change at any time.

  • In-Stock: 1 business day
  • Out of Stock: 3-4 weeks
30-Day Returns

Not quite right? No problem — we offer hassle-free 30-day returns on eligible items. A few exclusions apply.

More Information

Lifetime Manufacturer Warranty

All Whiteline products, except those listed below, are covered by a lifetime warranty against manufacturing defects in material and workmanship, valid for the original vehicle the product was installed on.

Whiteline Ball Joints, Tie Rod Ends, Bearings, Links and Springs are covered for 3 years or 60,000 km (36,000 miles), whichever comes first.

Exclusions
The warranty does not cover:

  • Incorrect installation or misuse.
  • Modification or alteration of parts.
  • Damage due to competition, motorsport, or off-road use.
  • Wear and tear from normal use.
  • Accidental or collision damage.

More Information

Product Details

This Whiteline Motor Mount Bushing fits the 1987-1988 Chevrolet R20 Suburban. Included: 1 bushing. The part number is W93464.

Engine mounts hold the engine in the chassis while absorbing vibration. When the rubber softens, the engine rocks under hard acceleration and when you lift off, and you may feel shudders, clunks, or a vague throttle. A new mount restores a solid hold. The polyurethane used here deflects much less than the original rubber under the same load.

Whiteline's note for this fit: Must reuse existing outer metal shell and drill out the welds/rivets to separate them for installation on the new insert. For use in either passenger or driver side. Whiteline rates the install as moderate and lists about 2 hours. It does not require a wheel alignment. Other Whiteline parts we list for the R20 Suburban: Transmission Mount Bushing Kit and 26.9mm Front Sway Bar Mount Bushing Kit.

Features

  • Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
  • Install guide: Instructions for fitting are packed in the box.
  • Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
  • Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
Part Number W93464
Part Name Motor Mount Bushing
Vehicle 1987-1988 Chevrolet R20 Suburban
Drivetrain RWD
Chassis Code C/K
Bushing Color Black
Bushing Material Polyurethane
Color Black
Durometer 72
Grade Type Regular
Installation Difficulty Moderate
Installation Time (hrs) 2
Kit Contents 1 Bushing
Material Polyurethane
Wheel Alignment Required No
Notes Must reuse existing outer metal shell and drill out the welds/rivets to separate them for installation on the new insert. Designed to reuse the stock 7/16" through bolt. For use in either passenger or driver side.

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1987ChevroletSuburbanRWDMust reuse existing outer metal shell and drill out the welds/rivets to separate them for installation on the new insert. Designed to reuse the stock 7/16" through bolt. For use in either passenger or driver side.
1988ChevroletSuburbanRWDMust reuse existing outer metal shell and drill out the welds/rivets to separate them for installation on the new insert. Designed to reuse the stock 7/16" through bolt. For use in either passenger or driver side.

Customer Reviews

Questions & Answers