Product Details
This page covers the Whiteline Front Sway Bar Washer Kit for the 1996-2002 Toyota 4Runner Limited (N180). Whiteline's note for this fit: Cupped washers only no bushings. It goes on the front of the vehicle. Part number KW2. You receive 8 washers.
Washers on a sway bar link support the bushings and spread the clamping load. Thin or worn factory washers can bend or flatten, which lets the bushings loosen and the link rattle. A cupped steel washer holds the bushing in place more securely.
Expect an easy job of about 1 hour. No alignment is needed afterward. We also list Front Steering Rack And Pinion Mount Bushing, Rear Lower Trailing Arm Bushing, and Front Upper Control Arm Bushing Kit for the 4Runner.
Features
- Case hardened: The case-hardened, corrosion-resistant build is made for long service.
- Cupped washers: The hardened, cupped steel washers are a stronger replacement for the originals.
- Less play: Takes movement and play out of the linkage for sharper handling.
- Clamping force: Helps the link bushings stay clamped for consistent performance.
- Wear resistance: Holds its shape when the link is loaded hard and cycled constantly.
Specifications
| Part Number | KW2 |
| Part Name | Sway Bar Washer Kit |
| Vehicle | 1996-2002 Toyota 4Runner Limited |
| Chassis Code | N180 |
| Color | Silver |
| Grade Type | Regular |
| Inside Diameter | 10.3 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Washers |
| Locking Type | No |
| Material | Steel mm |
| Thickness | 1.8 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Cupped washers only no bushings |



