Product Details
The Whiteline Front Sway Bar Washer Kit fits the 1996-2001 Toyota 4Runner Base (N180). Position: front. Included: 8 washers. Part number KW2. Whiteline's note for this fit: Cupped washers only no bushings.
Washers on a sway bar link support the bushings and spread the clamping load. Thin or worn factory washers can bend or flatten, which lets the bushings loosen and the link rattle. A cupped steel washer holds the bushing in place more securely.
Expect an easy job of about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the 4Runner: Front Steering Rack And Pinion Mount Bushing, Rear Lower Trailing Arm Bushing, and Front Upper Control Arm Bushing Kit.
Features
- Case hardened: Case-hardened and corrosion resistant for long service on the road.
- Cupped washers: The washers are hardened and cupped, a stronger alternative to the factory pieces.
- Clamping force: Helps the link bushings stay clamped for consistent performance.
- Less play: Removes play from the link assembly, which helps cornering response.
- Wear resistance: Built so the washers do not bend or wear when the link is loaded and moved again and again.
Specifications
| Part Number | KW2 |
| Part Name | Sway Bar Washer Kit |
| Vehicle | 1996-2001 Toyota 4Runner Base |
| Chassis Code | N180 |
| Color | Silver |
| Grade Type | Regular |
| Inside Diameter | 10.3 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 8 Washers |
| Locking Type | No |
| Material | Steel mm |
| Thickness | 1.8 mm |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Cupped washers only no bushings |



