Product Details
This Whiteline Front Upper Control Arm Set - Fixed Offset fits the 2022-2026 Toyota Tundra. Position: front. The kit contains 2 arms. Order it as part number KTA339. Chassis code: TNGA-F.
Control arms connect the wheel carrier to the body and set how the wheel moves as the suspension works. Replacing a worn or bent arm brings back the geometry the car was designed around. A set that arrives with its bushings fitted saves pressing new ones into old arms. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. An alignment is required after installation. Working on the same car? We also list Adjustable Rear Upper Control Arm Set, Rear Adjustable Panhard Rod, and 3-Point Adjustable 30mm Rear Sway Bar for the Tundra.
Features
- Install guide: Instructions for fitting are packed in the box.
- Serviceable: A grease fitting lets the part be serviced later.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | KTA339 |
| Part Name | Control Arms |
| Vehicle | 2022-2026 Toyota Tundra |
| Chassis Code | TNGA-F |
| Drivetrain | 4WD/RWD |
| Adjustable | No |
| Ball Joint Included | Yes |
| Ball Joint Mounting Type | Press In |
| Ball Joint Stud Type | Threaded |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushings Included | Yes |
| Color | Black |
| Construction | Tubular |
| Grade Type | Performance |
| Grease Fitting Included | Yes |
| Greaseable | Yes |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Arms |
| Material | Steel |
| Suspension Grade Type | Performance |
| Universal or Specific Fit | Specific Fit |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |