Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2000-2016 Audi S4 Base. The listing names the Base trim. Application note: Adds 0.5 degrees Camber. It goes on the front of the vehicle. Order it as part number KCA420. Included: 4 shell bushings and 4 tubes.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. To go with it on the Audi S4, see 16mm Rear Sway Bar Bushing Kit.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Material: Built from polyurethane.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bonded design: A bonded design adds strength for high load applications.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 2000-2016 Audi S4 Base |
| Drivetrain | AWD |
| Chassis Code | B5/B6/B7/B8 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |