Product Details
This Whiteline Front Upper Trailing Arm Bushing fits the 1993 Jeep Grand Wagoneer Base (ZJ). Order it as part number W51749. Position: front. Included: 4 shell bushings and 4 tubes.
A trailing arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. An alignment is required after installation. To go with it on the Grand Wagoneer, see Front Upper Shock Absorber Bushing Kit and 22mm Rear Sway Bar Bushing Kit.
Features
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Material: Built from polyurethane.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | W51749 |
| Part Name | Trailing Arm Bushing |
| Vehicle | 1993 Jeep Grand Wagoneer Base |
| Chassis Code | ZJ |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



