Product Details
This Whiteline Front Upper Trailing Arm Bushing fits the 1985-1988 Jeep Cherokee Chief (XJ). Whiteline part number: W51749. The kit contains 4 shell bushings and 4 tubes. Position: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired trailing arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Cherokee: Front Upper Shock Absorber Bushing Kit, 10mm Front Spring Pad Bushing, and 22mm Rear Sway Bar Bushing Kit.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Material: Made from polyurethane.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | W51749 |
| Part Name | Trailing Arm Bushing |
| Vehicle | 1985-1988 Jeep Cherokee Chief |
| Drivetrain | RWD/4WD |
| Chassis Code | XJ |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




