Product Details
This Whiteline Front Sway Bar Mount and Link Bushing Kit fits the 2000-2006 Chevrolet Tahoe. Included: 10 bushings, 2 tubes, 2 saddles, 2 bolts, 12 washers, 2 nuts, and grease. This part is for the front of the vehicle. Order it as part number W23825. Chassis code: GMT800.
The sway bar sits in rubber bushings that let it rotate as it twists. When those bushings wear or compress, the bar slides and shifts in its mounts, which causes clunking and a slight delay before it begins to resist roll. Replacement bushings hold the bar in its proper place while still letting it turn.
Installation is rated moderate, with about 1.5 hours of work listed. It does not require a wheel alignment. Working on the same car? We also list Front Upper and Lower Control Arm Bushing Kit, Body Mount and Radiator Support Bushing Kit, and Rear Sway Bar Mount and Link Bushing Kit for the Tahoe.
Features
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Hardware: Supplied with mounting hardware.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W23825 |
| Part Name | Sway Bar Mount Bushings |
| Vehicle | 2000-2006 Chevrolet Tahoe |
| Chassis Code | GMT800 |
| Drivetrain | 4WD/RWD |
| Bar Diameter | 32 mm |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 10 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 10 Bushings, 2 Tubes, 2 Saddles, 2 Bolts, 12 Washers, 2 Nuts, Grease |
| Mounting Hardware Included | Yes |
| Outside Diameter | 28.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |