Product Details
This Whiteline Front Sway Bar Mount and Link Bushing Kit fits the 1995-1999 Chevrolet Tahoe (GMT400). It goes on the front of the vehicle. You receive 10 bushings, 2 saddles, 2 tubes, 12 washers, 2 nuts, 2 bolts, and grease. The part number is W23827.
Sway bar mount bushings work as the bearings of the roll-control system. They need to hold the bar firmly without binding, and they have to cope with constant twisting. A new set restores that balance and quiets the knocks that worn ones make.
Expect a moderate job of about 1.5 hours. No alignment is needed afterward. Working on the same car? We also list Transmission Mount Bushing and Motor Mount Clamshell Insert for the Tahoe.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Install guide: Instructions for fitting are packed in the box.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Hardware: Also in the box: mounting hardware.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W23827 |
| Part Name | Sway Bar Mount Bushings |
| Vehicle | 1995-1999 Chevrolet Tahoe |
| Chassis Code | GMT400 |
| Drivetrain | 4WD/RWD |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 32 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 10 Bushings, 2 Saddles, 2 Tubes, 12 Washers, 2 Nuts, 2 Bolts, Grease |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |