Product Details
This Whiteline Front Sway Bar Link (OEM Style) fits the 2005 Saab 9-2X Linear (GD/GG). Part number KLC30. Application note: Replaces OE Plastic Link: Heavy Duty Alloy Link, Complete Assembly. Placement: front. The kit contains 2 links, 4 bolts, 8 washers, and 4 nuts.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Installation is rated easy, with about 1 hour of work listed. It does not require a wheel alignment. To go with it on the 9-2X, see Front Control Arm Lower Inner Rear Bushing, Rear Sway Bar Link, and 14mm Adjustable Front Camber Bolts.
Features
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Construction: High-strength alloy gives the strength needed without much weight.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Finish: A powder coated finish resists corrosion and wear.
- Corrosion protection: Plated finish keeps rust off the hardware.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KLC30 |
| Part Name | Sway Bar Link |
| Vehicle | 2005 Saab 9-2X Linear |
| Chassis Code | GD/GG |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 4 Bolts, 8 Washers, 4 Nuts |
| Length | 65 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Replaces OE Plastic Link - Heavy Duty Alloy Link - Complete Assembly |

